Scanning procedures, Scanning from the home screen, Scanning procedures -13 – Canon SCANFRONT 300P User Manual
Page 65: Scanning from the home screen -13, Scanning procedures” on p. 5-13.), See “scanning procedures” on p. 5-13.)
5-13
Chapter 5 Operating Procedures
7.
Scanning Procedures
You can perform scanning from the Home screen or the Job Button screen.
❏ Scanning From the Home Screen
Press a destination selection (E-mail, FTP, Fax, Shared
folder, or USB memory) button to open an address
selection screen and then select an address to send an
image file.
If you press the USB memory destination selection button,
press [Downward] and specify the folder in the USB
memory to which you want to save the image file.
If you press the Printer destination selection button,
configure the printer settings.
IMPORTANT
If the network environment to which the ScanFront is connected
is not running ScanFront Service, [Printer] is grayed out and
cannot be selected.
If you select an address and then press [Next], the Scan/
Delivery Options screen appears. Set the scanning
conditions and then start scanning.