Canon SCANFRONT 300P - Manual (Page 59)

5-7
Chapter 5 Operating Procedures
❏ Fingerprint Authentication (Only
Available with the ScanFront 300P)
Use the procedure below for fingerprint authentication.
For details on fingerprint registration,
see “Fingerprint
Registration (Only Available with the ScanFront 300P)”
on p. 5-10
.
1. Perform fingerprint authentication using the finger
with the registered fingerprint.
IMPORTANT
Perform finger authentication by gently pressing the finger while
slowly sweeping it at a constant speed to scan the fingerprint.
2. The Home screen (or Job Button screen) appears if
the fingerprint is authenticated correctly.
Hint
• When fingerprint authentication fails, the cause of the failure
and a solution appear on the screen. Follow the instructions in
the solution, and perform fingerprint authentication again.
• If a user fingerprint is registered for server authentication, and
the user password is changed on the server while the user is
logged in via fingerprint authentication, the following message
will appear on the screen. In this case, without using
fingerprint authentication, enter your user name and changed
password to log in, and then re-register your fingerprints.