Canon SCANFRONT 300P - Manual (Page 49)

4-3
Chapter 4 ScanFront Service
2.
Installing ScanFront Service
❏ System Requirements
Install ScanFront Service on a computer that is connected
to the same network as the ScanFront, and that meets the
following requirements.
Operating System
● Windows XP
● Windows Server 2003
● Windows Vista
● Windows Server 2008
● Windows 7
IMPORTANT
ScanFront Service is compatible with only the 32-bit editions of
the above operating systems. Installation and use on the 64-bit
editions is not supported.
❏ Installation
1. Insert the INSTRUCTIONS AND UTILITIES
CD-ROM into the computer.
2. Start the ScanFront Service installer.
Use Windows Explorer, for example, to locate the installer
in the following folder on the CD-ROM, and double-click
the installer to start it.
For Windows 7, Windows Vista, or Windows Server
2008:
Q:\ScanFrontService\Vista and 2008Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
For Windows XP or Windows Server 2003:
Q: \ScanFrontService\XP and 2003Server
English\setup.exe (“Q” is the letter assignment for the
CD-ROM drive)
Hint
An installer for the Japanese version of ScanFront Service is
also stored on the INSTRUCTIONS AND UTILITIES CD-ROM.
If necessary, you can install the Japanese version of ScanFront
Service by replacing “English” in the folders mentioned above
with “Japanese”.
You can only install one version of the software. Do not install
both versions on the same computer.
3. Click [Next].
The license agreement appears.