beautypg.com

Before setting up the scanner, Installation location, Before setting up the scanner -2 – Canon SCANFRONT 300P User Manual

Page 36: Installation location -2

background image

3-2

Chapter 3 ScanFront Setup

1.

Before Setting Up the Scanner

Before setting up the scanner, you need to move it to the installation site, and connect the AC adaptor and network cable.

Installation Location

The performance of this scanner is affected by the
environment in which it is installed. Make sure that the
location where the scanner is installed meets the following
environmental requirements.
● Provide adequate space around the scanner for

operation, maintenance, and ventilation.

● Avoid installing the machine in direct sunlight. If

this is unavoidable, use curtains to shade the
scanner.

● Avoid locations where a considerable amount of

dust accumulates.

● Avoid warm or humid locations, such as in the

vicinity of a water faucet, water heater, or
humidifier, and avoid locations where the fumes
from ammonia, paint thinner, or other volatile
chemicals may be present.

● Avoid locations that are subject to vibration.

● Avoid exposing the scanner to rapid changes in

temperature. If the room in which the scanner is
installed is cold but rapidly heated, water droplets
(condensation) may form inside the scanner. This
may result in a noticeable degradation in scanning
quality.

The following conditions are recommended for
optimal scanning quality:
Room temperature: 10 °C to 32.5 °C (50 °F to
90.5 °F)
Humidity: 20% to 80% RH

● Avoid installing the scanner near equipment that

generates a magnetic field (e.g. speakers,
televisions, or radios).

At least
15.75"
(40 cm)

At least
23.62" (60 cm)