Canon 970 IS - Manual (Page 98)

96
Once the focus is fixed to a subject’s face, the frame can be set to
follow the subject within a certain range.
Selecting a Subject to Focus On
(Face Select and Track)
Available Shooting Modes p. 232
To use the Face Select and Track function, first configure the
following settings.
- Set [AF Frame] to [Face Detect]
(p. 93) .
- Register the (Face Detect) function to the button
(p. 116) .
1
Select a face you wish to focus on.
1. When a face is detected, press the button.
• The camera enters face
designation mode, and the face
frame (
) of the main subject
displays in green. Even if the
subject moves, the frame will follow
the subject within a certain range.
2. Select the person you wish to focus
on.
• When several faces have been detected, using the
or
button or control dial will move the face frame to another
subject.
• The face frame will not display when a face is not detected.
• Holding down the DISP. button will
display face frames (up to 35) of all
the detected faces (green: face of
main subject, white: detected
faces).
• Pressing the button will release
the face designation mode.
Face Frame
Face Frame