Canon 970 IS - Manual (Page 112)

110
Movie:
1. Set the mode dial to
.
2. Use the control dial to select .
2
Press the button.
• The camera will switch to color input
mode, and the display will alternate
between the original image and the
Color Accent image (using the
previously set color).
3
Aim the camera so that the color you wish to
retain appears at the center of the LCD
monitor and press the button.
• Only one color can be specified.
• You can use the
or button or the control dial to specify
the range of the colors that are retained.
– 5 : Only takes the color that you want to retain.
+5 : Also takes colors close to the one that you want to retain.
4
Press the button to complete the setting,
then shoot.
z The default Color Accent is green.
z You may not obtain the expected results after color input
mode if you use the flash.
z The specified Color Accent is retained even if the camera’s
power is turned off.