Canon 970 IS - Manual (Page 176)

174
Configuring the Camera
This camera is equipped with a power saving function, which can
automatically turn off the power or LCD monitor.
Power Saving Function
Auto Power Down When set to [On], the power will shut off in the following
circumstances. Press the ON/OFF button again to
restore power.
Shooting mode: Approximately 3 minutes after the last
control is accessed on the camera
Playback mode or when connected to a printer:
Approximately 5 minutes after the last control is
accessed on the camera.
Display Off In shooting mode, the LCD monitor automatically turns
off after the selected time if no control is accessed,
regardless of the [Auto Power Down] setting. Press any
button other than the ON/OFF button or change the
camera orientation to turn the LCD monitor back on.
1
Select [Power Saving].
1. Press the button.
2. Use the or button to select the
menu.
3. Use the or button to select
[Power Saving].
4. Press the button.
2
Make settings.
1. Use the or button to select an
option.
2. Use the or button to make
settings.
3. Press the button.