Welch Allyn CSK Software Install Guide - Installation Guide - Manual (Page 27)

Installation guide Configuration 23
Configuring the CardioPerfect Workstation for
non-Welch Allyn devices
CardioPerfect Workstation uses the SCP-ECG plug-in, which is a standard
communications protocol for computer-assisted electrocardiography (EC71 or EN1064).
This plug-in, which works with the CPSAPI software module, enables you to configure the
CardioPerfect Workstation software to import resting ECG tests from non-Welch Allyn
devices and to export ECG tests to non-Welch Allyn record management systems using a
format translator, for example Datamed (sold separately).
To configure CPSAPI plug-ins, you modify an XML configuration file, and then restart the
CardioPerfect Services service.
The plug-in file, named CPSAPI.config, is stored in the local folder with the CPSAPI
service executable. By default, this folder is C:\Program Files\Welch Allyn\CPSAPI.
For a description of the CPSAPI module, see “Configuring the CP 200 patient-match
criteria (resolving patients)” on page 21.
To configure the plug-in for automatic ECG exporting
This procedure configures the CardioPerfect program to export ECG tests from the
CardioPerfect database automatically when they are captured and saved in the specified
folder.
1. Find the SCP-ECG Collector entry in CPSAPI.config.
Example:
enabled=”1” standalone=”1”
type=”CPWS.Plugins.ResultCollector.SCPECGCollector,CPWS.Plugins” values=”” destinationfolder=”specify export
folder here” />
2. Modify the enabled and destinationfolder attributes as desired.
3. Restart the CPSAPI service.
a. Go to Control Panel > Administrative Tools > Services.
b. Right-click CardioPerfect Services.
c. Select Restart.
Attribute Description Possible Values
enabled Specifies whether CPSAPI should load and execute the plug-in. 0 (Off), 1 (On)
destinationfolder Specifies the output folder where SCP-ECG files will be created.
Caution: The destination and source (export and import) folder
names must be unique. If these folder names are identical, the
system will not operate properly. Any valid Windows path