Welch Allyn CSK Software Install Guide - Installation Guide - Manual (Page 20)

16 Installation Welch Allyn Connex CSK software
CP 20
Before you install the Welch Allyn Connex CSK software do the following:
• Verify that the connectivity settings in the device software are properly configured.
For details, see the electrocardiograph directions for use.
• If using wireless communications, check the electrocardiograph’s settings. Verify that
these settings match the access point settings.
• Verify that you have administrator rights for the PC.
• Close all programs before starting the installation.
To install the Welch Allyn Connex CSK software
1. Insert the Connex CSK CD. This screen appears:
If this screen does not appear, open Connectivity Install on the CD.
3. Select CP20. Follow the instructions on the screen.
You can choose whether to add a shortcut to WACP 20.exe in the Startup group of
your Windows Programs menu. If you do, this program will automatically start every
time you log in to Windows.
When installation is complete, set the CardioPerfect options as follows.
4. Start the CardioPerfect Workstation application .
5. Open the CP 20 connectivity application by double-clicking its icon in the system tray.
(When this icon is present, the Workstation is listening for CP 20
electrocardiographs.)
CP 20 connectivity application icon