Welch Allyn CSK Software Install Guide - Installation Guide - Manual (Page 16)

12 Installation Welch Allyn Connex CSK software
CP 100 or CP 200
Before you install the Welch Allyn Connex CSK software do the following:
• If connecting to a CardioPerfect Workstation, do the following:
• Verify that the CardioPerfect Workstation software and database have both been
upgraded to version 1.6.0 or higher. If necessary, upgrade the software and
database now.
• When using a stand-alone CardioPerfect Workstation system, please install the
server software on the stand-alone CardioPerfect Workstation system
• When using a client/server configuration, please install the server software on the
CardioPerfect Workstation database server before installing the clients.
• Verify that the connectivity settings in the software are properly configured. For
details, see the electrocardiograph directions for use.
• If using a CP 200 electrocardiograph in a wireless configuration, do the following.
• Verify that the electrocardiograph software product version is 2.4.0 or later.
• Verify that the Wireless Settings item is available on the Connectivity Settings
menu. If not, a hardware upgrade is needed. Contact your Welch Allyn service
representative.
• Check the electrocardiograph’s network and wireless settings. Verify that these
settings match the access point settings.
For details, see the electrocardiograph directions for use.
• Verify that you have administrator rights for the CardioPerfect Workstation software
and for the PC.
• If your operating system offers User Access Control (UAC), disable the feature before
installation.
• Close all programs before starting the installation.
• If “Device driver signing” appears, select either “Yes” or “Continue.”
To install the Welch Allyn Connex CSK software
1. Insert the Connex CSK CD. This screen appears: