Welch Allyn LS200 Procedure Light - User Manual - Manual (Page 28)

22 Chapter 3 Maintenance Welch Allyn LS200 Procedure Light
Fuse Replacement
There are two replaceable fuses located in the fuse drawer of the
transformer housing. If either one of these blows, the unit will
not light. Replace only with Welch Allyn part number
236706-3907 for model 44200 or 236706-3114 for models 44202,
44204 and 44206.
1. Turn the power switch to the OFF position and unplug the
power cord from the electrical outlet and transformer.
2. Using a small (1/8") screwdriver, remove the fuse drawer (a)
from the transformer housing by releasing the spring loaded
snap connection (b) on both sides of the component.
3. Pull out fuse drawer.
4. Remove and replace the blown fuse(s). There is no required
orientation of the fuses.
5. Reinsert the drawer by pressing it into the connector until it
snaps into place.