Welch Allyn LS200 Procedure Light - User Manual - Manual (Page 23)

Directions for Use Chapter 3 Maintenance 17
It’s difficult to move the
luminaire, the joints are
stiff. The set-screw at the
connection at top of arm
and luminaire is too tight. Loosen set screw (A). (See
“Lamp Replacement” on
page 19.)
The arm knob at arm joint
is too tight. Loosen knob.
The set-screw in the joint
at the bottom of the arm
is too tight. Loosen set screw (B). (See
“Lamp Replacement” on
page 19.).
Trouble Possible Cause(s) Corrective Action