Welch Allyn LS200 Procedure Light - User Manual - Manual (Page 25)

Directions for Use Chapter 3 Maintenance 19
Lamp Replacement
1. Turn power switch to OFF position and unplug the power cord
from the electrical outlet.
2. Rotate luminaire so that the bezel and handle are facing you
(see A).
3. Turn handle counterclockwise to unscrew (see B). Remove
handle and carefully slide bezel out and allow to rest on wire
tether (see C).
WARNING The lamps operate at high temperatures.
DO NOT attempt to replace lamps while they are hot.
Wait until the lamps are cool. Lamps may shatter under
pressure, handle with care. Replace with Welch Allyn
lamp #06400 only.
Note There are (3) color correction filters visible on the bezel
assy once it is removed. These filters also have heat
reduction properties. Do not remove.