Welch Allyn CardioPerfect Workstation - User Manual - Manual (Page 36)

CardioPerfect Workstation
User Manual
DIR 80012336 Ver. E 36 / 38
Error
codes: Description
105 A time-out has occurred trying to receive email.
Action: Try again later.
If the problem persists, contact the ISP.
106 Unspecified POP error.
Action: Check the error description in the mail event log, it will give the error
text sent by the POP server.
107 A mail message has been received that is sent by an unknown contact. A
rejection message has been sent back to the sender.
Action: if desired. Add contact using Administrator tool
108 The mail message that has been received is invalid. It is corrupted or cannot
be read. A rejection message has been sent back to the sender.
Action: Try again, if problem persists contact Support.
109 An interpretation has been received, but the corresponding test is missing. A
rejection message has been sent back to the sender.
Action: if the test has been accidentally deleted. Ask the sender to send the
test first.
110 A mail message has been received that is sent by a known contact, but the
password is incorrect. A rejection message has been sent back to the
sender.
Action: change contact password or let the sender change the password
entry
111 A time-out has occurred trying to connect to a host.
Action: Try again later; the host may be down.
If the problem persists, check the contact address of the host using
Administrator Tool. Also, verify that the network is functioning correctly.
112 Contact/Host failed to receive mail message or time-out waiting for reply from
host.
Action: Check if local user account has writing privileges in the temporary
directory specified in the CC MailServer Configuration Tool. Check if there is
enough disk space to temporarily store mail messages, check if the database
server has enough disk space to grow.
113 Contact/Host failed to receive mail message or time-out waiting for reply from
host.
Action: See error 112.
114 Direct socket received unknown command or error.
Future use: possibly host and client are using different software versions.
Also: connection disconnected by host, the host is going down during a
connection
Action: handle like error 111.