Welch Allyn CardioPerfect Workstation - User Manual - Manual (Page 16)

CardioPerfect Workstation
User Manual
DIR 80012336 Ver. E 16 / 38
3. Working with tests
3.1 Test modules
Once you have created a patient card or selected an existing one, you are ready to run a
test on the patient. Welch Allyn CardioPerfect Workstation offers these diagnostical tests:

Resting ECG testing

Exercise ECG testing

Spirometric testing

Ambulatory blood pressure testing (ABP)

Mini Holter event ECG recordings (Recollect)
In the Welch Allyn CardioPerfect Workstation software, each test has its own module with
test specific functionality. Not all modules have to be present in one system; your system
may, for example, contain the Rest and Exercise module, but no Spirometric or ABP
module.
Welch Allyn CardioPerfect Workstation contains functionality that is common to all tests,
such as patient and test administration and printing. The instructions that are given in this
chapter apply to all tests. For test specific information, please refer to the manuals that
come with the various diagnostic modules.
3.2 Create a new test
Before you can record a test, you first need to enter some information about that test, like
the patient and the kind of test.
To create a new test:
1. Select the patient for whom you want to record the test.
2. In the File menu, point to New and select the test that you want to run. You can
choose between:
Rest ECG
Exercise ECG
Spirometry test
Ambulatory blood pressure test
Mini Holter event ECG test
3. A New test window is displayed. The look of this window depends on the kind of
test that you selected.
4. In the New test window, enter the necessary information.
5. Click the OK button.
Tips for creating new tests:
To create a new test, you can also:
 Click on the appropriate button in the toolbar.