Welch Allyn CardioPerfect Workstation - User Manual - Manual (Page 18)

CardioPerfect Workstation
User Manual
DIR 80012336 Ver. E 18 / 38
Important: Once you have deleted a test, you cannot get it back. It is completely removed
from the database. So always make sure that you have selected the correct test, and that
you really want to delete it.
To delete a test:
1. Select the test that you want to delete.
2. In the Edit menu, select Delete, or press [CTRL]+[DEL]. A message is displayed
that asks you if you really want to delete the selected test.
3. Click the OK button. The test is deleted.
3.6 Place a test on a disk
You can put a test on a disk, so that you can take it with you and open it on another Welch
Allyn CardioPerfect Workstation, for example, to show the test to a colleague that is not
connected to the same database as you. Placing a test on a disk, or on another location on
your computer, is called exporting a test.
To place a test on a disk:
1. Insert a removable disk if desired.
2. Select the test that you want to place on the disk.
3. From the File menu, select Export. The Export to file dialog box is displayed.
4. Select whether you want to export the current test or all tests in the list that are of
the same type.
If you select... Then the following is exported...
Current test Only the test that you selected
All tests in list of same type All tests for the patient that you selected that are of
the same type as the test that you selected.
Example: if you selected an ECG for Mrs.
Thompson, then all ECGs for Mrs. Thompson are
exported.
5. Select the location you want to export the files to. In this case, you want to put the
test on a disk, so use the Browse button to browse to the disk location (A:\).