Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual - Manual (Page 40)

36 Alarms Welch Allyn 1500 Patient Monitor
Alarm limit setting
1. Press the Setup button .
2. Select the menu item Alarms.
3. Use the trim knob to scroll through the alarm settings and select the limits.
Note All alarm limits are reset to the default settings after confirming a new patient
(see
“Standby mode” on page 24 ).
Note Individual parameter alarm limits can be set in the parameter menu (see
“Monitoring and Measurements” on page 39 ).
Note The Alarm settings for arrhythmia are detailed in the Arrhythmia menu option in
the setup menu.