beautypg.com

Standby mode – Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual User Manual

Page 28

background image

24

Operation

Welch Allyn 1500 Patient Monitor

Standby mode

In standby mode, patient monitoring is temporarily interrupted. Confirmed patient
information is saved.

1.

Press the Standby button

. The following screen is displayed:

2. To exit standby mode press any button. You are prompted to confirm the same patient

or enter a new patient.

WARNING

In standby mode, vital signs data and alarms are no longer displayed

or collected.

Note

Patient information that has not been confirmed is lost when standby mode is
entered.

Note

The standby message is continuously displayed while the unit is in standby mode.

Note

After exiting standby mode, ensure that the NIBP intervals are re-armed by
manually starting an NIBP measurement.

See also other documents in the category Welch Allyn Equipment: