Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual - Manual (Page 113)

Directions for use Settings 109
Sub menu Parameter Description
System
(password
protected - see
previous page) Height units Select Inches (in) or centimeters (cm)- sets the monitor’s
measurement units.
Weight units Select pounds (lbs) or kilograms (kg)- sets the monitor’s
measurement units. In neonate mode the units are
automatically switched to grams.
Acuity Enabled Yes/No. Connects to Acuity. Note that Acuity can only be
enabled when Enable Acuity connection in the service setup is
set. This is not available in this release.
Set Date and Time Entry of the year/month/day/hour/minute
Save User Defaults With this function, values changed by the user can be saved
(see
“Standby mode” on page 24)
Show Event Log Display of the monitor event log (see “Event log screen and
CO2 calibration” on page 110).
Service This provides settings, options and service information for
service personnel only.
Factory This menu is for factory use only.