Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual - Manual (Page 115)

Directions for use Settings 111
Parameter settings
1. Move to the desired parameter measurement field using the trim knob. A white
frame appears around the selected measurement field.
2. The selected menu is displayed by pressing the trim knob.
The settings available and default settings are given in the Monitoring section (see
“Monitoring and Measurements” on page 39).
• ECG / Heart rate / Pacemaker (see “ECG” on page 40).
• ST (see “ST measurement (option)” on page 52).
• RR / Respiration (see “Respiration rate” on page 54).
• etCO
2
/ Respiration (see “Capnography” on page 56)
• NIBP (see “NIBP monitoring” on page 63).
• SpO
2
(see “SpO
2
monitoring” on page 67).
• IBP (see “IBP monitoring” on page 72).
• Temperature (see “Temperature monitoring” on page 76).
• Cardiac output ((see “Cardiac output (option)” on page 77).