Vintage Cellars Platinum MIni Split Tech Manual - Manual (Page 6)

Page 4 | 1-800-343-9463
MPS 033114
WARRANTY REGISTRATION
In order to activate the warranty of your system, the Verification and Operational
Documentation must be completed by the certified refrigeration technician
installing your system and submit via mail, fax, or e-mail.
Mail to:
WhisperKOOL
ATTN: Warranty Registration
1738 E. Alpine Avenue
Stockton, CA 95205-2505
USA
Fax to:
209.466.4606
Scan and email to:
[email protected]
OR OR
INTRODUCTION
Customer Service
Thank you for purchasing a WhisperKOOL cooling system. We strive to provide the highest quality products and the
best possible customer service. If you have any questions about your system, please call us at 1-800-343-9463 or visit
WhisperKOOL.com.
Using the Manual
This Owners Manual is intended to assist in the proper maintenance of the cooling system. In order to ensure the
longevity of your cooling unit, the equipment should be installed as outlined in the Technician’s Manual. It is also vital
to establish a proper care and maintenance schedule. Please read and review this manual carefully and keep it for
future reference.
What Is the WhisperKOOL Cooling System?
The WhisperKOOL cooling system is a specialized refrigeration system designed for one purpose only: to maintain
the optimal temperature and humidity levels conducive to the proper storage and aging of fine wines. This system
produces minimal in-cellar noise and has the most lenient exhaust requirements. An exterior housing is required for
outdoor condensing unit installations.
How Does the Cooling System Work?
Similar to the air conditioning systems used for homes, the Evaporator Unit (Fan Coil Unit) and Condensing units
are installed in separate locations and are connected by a refrigerant line set. The evaporator portion is commonly
installed in the wine cellar, with the condensing unit located either outside or in a remote indoor location that is
ventilated. An exterior housing is required for outdoor condensing unit installations.
Temperature Setting
The WhisperKOOL system can be set at any temperature within the acceptable wine-aging range of 50°F to 70°F. It
is designed to cool up to 55°F cooler than the ambient temperature of the space to which the condensing unit is
installed.