Tycon Power TP2700WC User Manual

Page 26

4.1.2

Select Alarm to enter the Alarm page

This section is used to set the desired time alarm, high or low alarm values for the base station, as

well as enable or disable the corresponding alarm functions. Once you made your choice, choose

Save to make the setting effective. If you don

’t want to make any change, just press Cancel and exit

without change.

4.1.3 Max / Min Data

Select Max / Min Day to open the Max / Min Day page

This is where you can clear all the min/max readings from the base station. Press clear to clear the

data or exit to return to the main page.