Tycon Power TP2700WC - Manual (Page 10)

10
LEFT: Move to previous segment / move to main menu during setting.
RIGHT: Move to next segment / move to sub menu during setting.
Base Station / Display Console Operation
Program mode
The screen is divided into 10 segments for selection and there is a message display panel on
the bottom.
There are six program modes: normal, setting mode, history mode, alarm mode, max/min
mode and calibrated mode. All the modes can be exited at any time by pressing the HISTORY
key, or waiting for a 30 second timeout to take effect.
Normally, if the segment selected has multiple parts, press SET key to choose a different part.
Example: the current section is RAIN, you can press SET key to select among RAIN RATE,
RAIN EVENT, DAY, WEEK, MONTH, YEAR and TOTAL.
1. Quick Display Mode (Updates every 5 Seconds)
In the normal mode and once some segment is selected ( Different segments can be chosen
by pressing” Left ” or ” Right” key. And the default selected segment is time and date), there
will be different messages that show on the message panel. If any alarms occurred, the alarm
information will be displayed in real time as well. The messages will rotate automatically or you
can transfer between messages manually by pressing”+” or “-” button.
Note: Press + to fast switch to next message
Press – to fast switch to previous message.
Press left or right to select different segments.
 Time and date