Tycon Power TPSM-70x4-UNI - Manual

STEP 1A: ASSEMBLE POLE BRACKET
ASSEMBLIES AS SHOWN TO APPROXIMATE
DIMENSIONS. ASSEMBLE TWO ASSEMBLIES
5200009-02
BRACKET "A"
5200009-01
5200009-03
BRACKET "B"
NUT
LOCK
WASHER
WASHER
BOLT
28 1/2"
27 1/2"
723.90mm
698.50mm
A
B
36"
914.40
THIS ASSEMBLY MUST BE TURNED
UPSIDE DOWN, WITH"A" BRACKET ON
THE RIGHT AND "B" BRACKET ON THE LEFT.
STEP 1B: ATTACH POLE
MOUNT BRACKET ASSEMBLY
TO POLE USING HOSE
CLAMPS THAT ARE PROVIDED
ADJUST BRACKET ASSEMBLIES
TO APPROXIMATE
DIMENSIONS SPECIFIED AND
TIGHTEN SNUG TO POLE BUT
STILL ALLOW ASSEMBLIES TO
MOVE SLIGHTLY.
A
B
B
A
2 PANEL
MOUNTING
RAILS
4 PANEL
MOUNTING
RAILS
FOUR PANEL MOUNTING REQUIRES
EXTENDED MOUNTING RAILS AS
SHOWN IN STEP 2B
STEP 5: ADJUST ANGLE OF
SOLAR PANEL BY MOVING
LOWER POLE BRACKET
ASSEMBLY TOWARD THE
GROUND AS SHOWN.
STEP6: WHEN THE SOLAR PANEL ASSEMBLY IS POSITIONED AND TILT ANGLE
IS SET PROPERLY THEN TIGHTEN ALL NUTS AND BOLTS SECURELY.
Optimum Winter Tilt Angles
Houston / Cairo 56 deg
Albuquerque / Tokyo 60.5 deg
Denver / Madrid 65 deg
Minneapolis / Milano 69.5 deg
Winnipeg / Prague 74 deg