Tycon Power TP2700WC User Manual
Page 13
13
a) The max Rainfall of rainfall rate of the day.
b) The max Rainfall since last reset (including rainfall rate during 1 day, 1 week, 1 month,
and 1 year).
2. Setting Mode
2.1 In normal mode, press SET key for 3 seconds to enter the setting mode.
Then press
”Left ”button, you will transfer among the main menu with options of :
TIME SETTING
UNIT SETTING
Record save interval
Rain sensor setting
Barometric setting
Contrast setting
Key Beep Setting
REREGISTER Transmitter
Calibration setting
Transmitter ID
Choose one option and then press
”Right” button, you will enter the sub menu.
Press + / - key to transfer the unit or change the value. Hold the + / - key for 2 seconds to
increase / decrease digits in large steps. Press HISTORY key or wait for 30 seconds at any
time, the Display Console will return to normal mode.
Sub menus of every option:
TIME SETTING
a) 12H/24H format select
b) MM-DD-YYYY / DD-MM-YYYY / YYYY-MM-DD select
c) Set time (hour, minute)
d) Set clock (month, day, year)
e) Time Zone select
f)
RCC ON/OFF select
g) Daylight saving settings (DST ON/OFF)
h) Set Latitude (NORTH or SOUTH).
RCC mode:
WWVB: the Daylight saving settings always display.
MSF and DCF: if RCC is OFF, the Daylight saving settings will display.
JJY: without daylight saving settings.
UNIT SETTING