Tycon Power TP2700WC - Manual (Page 23)

23
WeatherSmart PC Software User Manual
1.0 General Information
The Weather station is a weather monitoring device that displays and records the weather data
from internal and external sensors. Besides the indoor temperature, indoor humidity and air
pressure measured by internal sensor, it will receive the outdoor temperature and humidity, wind
and rainfall. Light & UVI and Heat index are transmitted by outdoor sensor as well.
After installing the “WeatherSmart” program on your windows computer, you can see all the
weather data from the base station including data from both indoor and outdoor sensors.
For operation, simply use the supplied USB cable and connect the Base Station to the PC. After
installation and connection you can start to track current and historical weather information at your
fingertips.
2.0 System Requirements
To install the “Weather Smart” software onto your PC, the minimum requirements for PC are as
follows:
Operating System: Windows NT4 (Service Pack >= 6a), Windows 2000, Windows XP, Windows
Vista. Windows 7, Windows 8
Internet Explorer 6.0 or above
Processor: Pentium III 500 MHz or above
Memory: at least 128MB, 256MB recommended
CD-ROM Drive
Base Station and PC must be connected by USB cable
3.0 Installation of the
“WeatherSmart” Software
Firstly, the Base Station and the Outdoor Sensors should be installed and checked for correct
function. After successful checking, install the “WeatherSmart” software as follows:
1. Switch on your PC and insert the CD-ROM into the CD-ROM Drive.
2. Double click “Weather Smart
.exe ” ”
3. Select the installation process language option and click ok
4. Click next and select the destination folder (default is recommended)
5. Click next and select the shortcut folder (default is recommended)
6. Click next and select the additional tasks.
7. Click next and setup is now ready to begin installing Weather Smart on your computer.
8. Click install, software will be installed automatically.