CITIZEN PPU-231 - Manual (Page 87)

PPU-231 User’s Manual
74 CITIZEN
GS H n
[Function] Selecting of Printing Position of HRI Code
[Code] <1D>H<48>H
[Range] {0
≤ n ≤ 3} Data is described in Hex code.
[Outline] Selecting printing position of HRI code in printing bar codes.
• "n" means the followings.
n (Hex) Printing Position
0 No printing
1 Above the bar code
2 Below the bar code
3 Both above and below the bar code
The HRI code refers to the bar code-turned characters so that you can read them.
[Caution] The HRI code is printed in the font selected with GS f.
Specify before the GS k command.
[Defult]
• The initial value of n is "0".
[See Also] GS f
[Sample Program] [Print Results]
LPRINT CHR$ (&H1B) + "3" + CHR$ (5) ;
LPRINT CHR$ (&H1D) + "h" + CHR$ (50) ;
LPRINT CHR$ (&H1D) + "H" + CHR$ (0) ;
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (1) ;
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (2) ;
GOSUB BC
LPRINT CHR$ (&H1D) + "H" + CHR$ (3) ;
GOSUB BC
END
BC :
LPRINT CHR$ (&H1D) + "k" ;
LPRINT CHR$ (4) ;
LPRINT "12" + CHR$ (0) ;
LPRINT CHR$ (&HA) ;
RETURN