CITIZEN PPU-231 - Manual (Page 79)

PPU-231 User’s Manual
66 CITIZEN
ESC $ n1 n2
[Function] Specifying the Absolute Positions
[Code] <1B>H<24>H
[Range] {0
≤ n1 ≤ FF}
{0
≤ n2 ≤ 1} Data is described in Hex code.
[Outline] The printing start position is specified in the number of dots (1/203 inch
unit) from the beginning of line.
• The number of dots is divided by 256, whose quotient is taken as n2 and the residual
as n1.
• Therefore, the printing start position is equal to n1 + n2 x 256 from the beginning of
line..
[Caution]
• Specifying beyond the line end is ignored.
[Default]
• The initial value is not specified.
[See Also] ESC ¥
[Sample Program]
LPRINT CHR$ (&H1B) + "$" ;
LPRINT CHR$ (0) + CHR$ (0) + "A" ;
LPRINT CHR$ (&H1B) + "$" ;
LPRINT CHR$ (50) + CHR$ (0) + "B" ;
LPRINT CHR$ (&H1B) + "$" ;
LPRINT CHR$ (0) + CHR$ (1) + "C" ;
LPRINT CHR$ (&HA) ;
LPRINT CHR$ (&H1B) + "$" ;
LPRINT CHR$ (100) + CHR$ (0) + "A" ;
LPRINT CHR$ (&H1B) + " ¥ " ;
LPRINT CHR$ (&HC2) + CHR$ (&HFF) + "B" ;
LPRINT CHR$ (&HA) ;
[Print Results]