CITIZEN PPU-231 - Manual (Page 64)

PPU-231 User’s Manual
51 CITIZEN
ESC
= n
[Function] Data Input Control
[Code] <1B>H<3D>H
[Range] {0
≤ n ≤FF} Data is described in Hex code.
[Outline] Selecting equipment in which data input from the host is effective.
• Each bit of n indicates as follows:
Value
Bit Equipment
0 1
0 Printer Invalid Valid
1 Not defined
2 Not defined
3 Not defined
4 Not defined
5 Not defined
6 Not defined
7 Not defined
• When the printer has not been selected, this printer abandons all the received data
until it is selected by this command.
[Caution]
• Even when the printer has not been selected, it can become BUSY state
through printer operation.
• When the printer is deselected, this printer discards all the data until it is
selected with this command.
[Default]
• The initial value of n is "1".
[Sample Program]
LPRINT "AAAAA" ;
LPRINT CHR$ (&H1B) + "=" + CHR$ (0) ;
LPRINT "aaaaa" + CHR$ (&HA) ;
LPRINT CHR$ (&H1B) + "=" + CHR$ (1) ;
LPRINT "AAAAA" + CHR$ (&HA) ;
[Print Results]