CITIZEN PPU-231 - Manual (Page 23)

PPU-231 User’s Manual
10 CITIZEN
(1) POWER switch
Turns on/off the power for the printer/presenter unit
(The POWER switch can be mounted either side of the unit.).
(2) FEED switch
Feeds the paper to exit the paper.
(3) Power connector
Connects to the optional AC adapter (31AD).
(The power connector can be mounted at any one of the 6 locations on the unit. See 4.1.1 ”Connecting
the AC Adapter”.)
(4) Presenter
Feeds the paper roll.
(5) Auto Cutter
Automatically cuts the printed paper by a command. Either partial cut or full cut is selectable.
(6) DIP switches
Initially set the printer/presenter unit at power-on and set the functions.
(7) Interface connector
Connects to a communication interface cable. There are two types, for serial and parallel interfaces.
(8) Head-up lever
Used when inserting the paper or exiting the paper.
(9) Knob
Use this to manually feed the paper.
(10) Front door
Open this door to remove remaining paper inside the presenter.