CITIZEN PPU-231 - Manual (Page 58)

PPU-231 User’s Manual
45 CITIZEN
ESC & s n m [ a [ p ] s
× a] m – n +1
[Function] Defining Download Character
[Code] <1B>H<26>H [
••]m-n+1
[Range] {s = 03}
{20 (Hex)
≤ n ≤ m ≤ 7E (Hex)}
{0
≤ a ≤ 0C(Hex)} (Font A)
{0
≤ a ≤ 0A(Hex)} (Font B)
[Outline] Defines the font of download characters of alphanumeric characters.
• "s" indicates the number of bytes in vertical direction.
• "n" indicates the start character code and m the end character code. To define only
one character, set n=m.
• Character codes definable includes 95 ASCII codes in total between
<20>H
∼<7E>H.
• "a" indicates the number of dots in horizontal direction for definition.
• "p" is the data to be defined, which indicate a pattern equal to "a" dot in horizontal
direction from the left end. The rest of the pattern on the right side is filled with
space.
The rest of data to be defined is s x a.
• Download characters thus defined remain valid until redefinition, ESC @ execution,
GS * execution, or power OFF is practiced.
[Caution] Download characters and download bit images can not be defined simultaneously.
Running this command clears the definition of the download bit image.
[Default] Same as the internal character set