Torbal ATS120 - Manual (Page 6)

- 5 -
Instruction Manual – ATS / BTS Moisture Analyzers
1.3 More Cautionary Notes and Precautions
Correct location and proper environment has a significant impact on the accuracy of the weighing results of the
TORBAL Moisture Analyzer.
The optimal location for your unit:
• Stable, vibration-free base as horizontal as possible
• Away from direct sunlight
• Not exposed to high temperature variations
• Away from direct drafts
• Best location: stable bench away from direct drafts, doors, windows, radiators, and air conditioner vents.
WARNING:
• The Analyzer is designed for indoor use only.
• Do not operate the unit in hazardous areas or conditions.
• Never Operate the Analyzer near combustive or explosive vapors
• Do not use the Analyzer in locations subject to high humidity or dust levels.
• Do not connect cables in ways other than those designated in this manual.
• Be sure to set the Analyzer on a firm, stable horizontal surface.
• Never stand on or lean on this product. Equipment may fall or collapse, causing
breakage and possible injury.
• Before moving the product, unplug it and unplug all cables connected to it.
• When storing, transporting, or returning the unit for service, always use the original
packaging.
WARNING:
• Never attempt to repair, disassemble, or modify the Analyzer yourself.
Tampering with the unit may result in injury and cause more damage to the
equipment.
• Never use different halogens than what is specified in operators manual
• Be sure to use the specified power source.
• Do not allow foreign matter to fall into the unit.
• If water or other liquid spills into the Analyzer, do not continue to use it. Unplug the
power cord immediately and contact technical support.