Torbal ATS120 - Manual (Page 33)

- 32 -
Instruction Manual – ATS / BTS Moisture Analyzers
1.
To begin weighing, press the toggle key (
) to switch from a Moisture Analyzing Mode to a Weighing
Mode or vice versa. The scale is ready to begin weighing as soon as the stabilization indicator ( )
appears on the display.
2.
When weighing, always place the mass in the middle of the pan. The weighed result may be taken when
the stabilization indicator appears on the display.
22.1. Taring
1.
If a container is used for weighing, it may be tared. In taring the container, the scale subtracts the weight of
the container from the gross weight to obtain the net weight.
2.
To tare the weighing container, place it in the middle of the pan. The container’s weight will be shown on
the display.
3.
Once the stabilization indicator appears on the display, the container is ready to be tared. To tare the
container, press the T button. The display will show a dotted line which indicates the scale has begun the
taring process.
4.
When finished taring, the balance will return to Weighing Mode.
Note: Do not touch or move the scale during the taring process.
Chapter 22: Weighing