Torbal ATS120 - Manual (Page 13)

- 12 -
Instruction Manual – ATS / BTS Moisture Analyzers
8.1. Configuring Drying Settings
1.
Press the MENU key, then use the arrow keys to select “Drying Settings” and press ENTER.
2. Use the arrow keys to select parameters and input desired values. Press ENTER to accept
and confirm a setting.
Note: Connecting a PS2 keyboard to the analyzer allows for faster data input and configuration.
8.2. Saving drying settings
1.
After configuring all settings, use option 8
(Settings storing) to select a desired
memory location (1 of 20).
2.
Proceed to option 9 (Exist) and press the
Enter key. The analyzer will display “Save
Setting?”
3.
Use the arrow navigation keys to select
“YES” and press the Enter key to confirm.
Chapter 8: Configuring Drying Settings and Understanding the parameters