Rice Lake Datamax-ONeil I-Class Printer - Manual (Page 65)

I-Class 55
Communications (continued)
GATEWAY Specifies the network gateway address the
NIC Adapter should use.
SNMPTRAP DESTINATION Selects the Network IP address where all
SNMP Traps will be sent. If zeroed, no
traps are sent.
PROTOCOL The network protocols recognized by the
NIC Adapter.
NETWARE Allow the printer to be driven from an NDS
Novell Print Queue.
— ENABLED Netware is enabled by default.
DISABLED Ignore the Netware protocol. Select this
option if Netware is not needed.
DISCOVERY This is the address discovery method used
by the NIC Adapter if a static address is
not utilized. If no server for any of the
discovery methods is found, the static
value specified above is used.
; Note: For faster NIC Adapter boot times,
disable any discovery methods not used.
DHCP Dynamic Host Control Protocol.
Automatically assign IP address from a
DHCP Server.
— ENABLED DHCP is enabled by default.
WARNING! An IP Address assigned by a DHCP
has precedence over any static IP Address
stored in the NIC Adapter.
DISABLED Disable DHCP.
; Note: Select this option to insure any static IP
stored is used by the NIC Adapter.