Rice Lake Datamax-ONeil I-Class Printer - Manual (Page 50)

40 I-Class
Printer Options (continued)
CUTTER Used to cut media into separate labels.
(The physical presence of a device must be
detected to show the ENABLE/DISABLE
selections.)
ENABLED Enables cutting.
— DISABLED Disables cutting.
NOT INSTALLED No Cutter is detected.
SCANNER Used to check the bar codes on the labels.
(The physical presence of a device must be
detected to show the menu selections.)
NOT INSTALLED No Scanner is detected.
MODE Enables bar codes to be read by the
Scanner.
— PICKET FENCE Reads horizontal bar codes (individual
bars appear like the pickets in a fence) as
the label exits the printer.
DISABLED Disables the scanner.
BARCODES Enables the scanner to read the respective
bar code. Also see Appendix B.
; Note: To maximize throughput and decoding
integrity enable only those symbologies that will
be read.
— CODE 39
IATA
—
CODABAR
— INTERLEAVED 2 OF 5
— INDUSTRIAL 2 OF 5
— CODE 93
— CODE 128
— MSI/PLESSEY
— EAN(13/8)
— EAN(13/8)+2
— EAN(13/8)+5
— UPC(A/E)
— UPC(A/E)+2
— UPC(A/E)+5