Rice Lake MSI-4260 Port-A-Weigh - Manual (Page 45)

TARE
T
TARE
T
TARE
T
USER
F
USER
F
ZERO
O
sto
ZERO
O
sto
If you are already in the Cal menu
skip to step 2
1) Remove the seal screw. With
a small screwdriver press the
Cal Switch behind the seal
screw. The CAL Setup Menu
appears.
2) Press the USER key to
scro ll to ”Setup” .
3) Press TARE to enter the Cal
Setup Menu.
4) Press USER to scroll to the
“Auto0” menu.
5) Press TARE to enter the Auto-
Zero Menu. The current setting
is displayed (blinking)
6) Change the setting between
On or OFF using the
USER
key.
7) Press TARE to set the
Autozero. The display goes to
the next item in the CAL Setup
Menu.
8) Either press ZERO twice to
exit Setup and store all
changes, or continue to
another Setup Menu item
using the
USER Key.
&$/
Auto Zero
Maintenance Setup
VHWYS
6WDQG
$YWR
2II
6WDQG
Next Cal Setup Menu Item
Store and return to
weight display
&D/
6WRUH
Calibrate Menu
Blinking
2Q
Blinking
USER
F
Remove
Hex Seal
Screw
Cal Switch
Access
Press Switch
behind the hole
with a small
Screwdriver
Calibration 41
Figure 5-10. Auto Zero Maintenance