Rice Lake MSI-4260 Port-A-Weigh - Manual (Page 33)

Set Up 29
4.8 Units
Units can be changed in two ways:
• Program a User Function Key to Units
• Change the units with the setup menu with the following procedure
1) With the 4260 off, press and hold
the USER key, then press the
POWER key.
...or while the 4260 is on, press USER
and POWER simultaneously.
2) The first item of the Setup Menu
is “Func1”. Scroll to “Unit” with
the
USER key.
3) To setup the weight units, press
TARE . The display will blink
“Unit”.
4) Change the weight units by
pressing the USER key. The unit
is indicated by the annunciators.
5) When the desired unit setting is
annunciated, press TARE . The
next item in the Setup Menu
appears.
6) Either press ZERO to exit Setup
and store all changes, or
continue to another Setup Menu
item using the
USER Key.
Units Setup
)YQF
)YQF
Next Setup Menu Item
8QLW
blinking
Store and return to
weight display
6WRUH
USER
F
8QLW
TARE
T
TARE
T
ZERO
O
sto
Cancel all setup
changes
esc
POWER
8QLW
blinking lb
8QLW
blinking kg
USER
F
Hold
USER
F
esc
POWER
USER
F
USER
F
Note
The OIML LFT scales do not allow units to be changed.
Figure 4-9. Units Setup