Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 32)

26 Laser LT Installation and Operation Manual
NET.LOC 0 This is the character location in the string format. A 0 (zero) indicates that the
Laser LT will look for the character anywhere in the incoming data. The
range is 0-63
PRI.CHAR 76 (L) Allows the user the select primary unit character
PRI.LOC 0 This is the character location in the string format. A 0 (zero) indicates that the
Laser LT will look for the character anywhere in the incoming data. The
range is 0-63
SEC.CHAR 75 (K) Allows the user to select the secondary unit character
SEC.LOC 0 This is the character location in the string format. A 0 (zero) indicates that the
Laser LT will look for the character anywhere in the incoming data. The
range is 0-63
MOTION.CHAR 77 (M) Allows the user to select the motion status character. When a motion
character is received, the standstill annunciator is turned off. When no
motion character is being received, the standstill annunciator is turned on.
MOTION.LOC 0 This is the character location in the string format. A 0 (zero) indicates that the
Laser LT will look for the character anywhere in the incoming data. The
range is 0-63
OVR.CHAR 79 (O) Allows the user to select the overload status character
OVR.LOC 0 This is the character location in the string format. A 0 (zero) indicates that the
Laser LT will look for the character anywhere in the incoming data. The
range is 0-63
LWPOS 0 Defines the position of the last charactor in a weight. Range 0-63 with 0 as
the default.
• With a 0 setting, the LaserLT will search from the end of the data stream
for the first group of digits.
• With a non-zero setting, the LaserLT will begin searching for digits at the
specified location.
• If LWPOS is past the weight in the data stream, it will work its way back
to the first group of digits it finds.
• A custom setting of this parameter is how a particular value is displayed
from a multi-weight data stream.
ENDCHAR CR Choices:
CR
LF
FF
ETX
The terminating character of the received weight stream
SPECIALINDICATOR NONE
TOLEDO
DWM4 1 (Flexweigh)
LB - OZ
F2500 (Fairbanks) This configures the Laser LT to use a serial stream that requires special
handling.
STARTCHAR STX
CR
SOH
LF
FF
ETX Defines which character indicates the start of a weight stream.
Command Default Value Description
Table 4-1. Annunciator and Weight Position EDP Commands