Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 24)

20 Laser LT Installation and Operation Manual
3.4 Testing the Remote Display
The Laser LT remote display provides a test menu to check the hardware of the remote display. These tests can be
accessed through the main menu (Figure 3-8).
CONFIG SERIAL TEST VERS
DISPLA INTENS
DIGIO KEYPAD
1-7
STRTUP
On
Off
RESET
Figure 3-8. Test Menu Choices
Table 3-5. Test Menu Descriptions
TEST Menu
Parameter Choices Description
DISPLA When this feature is enabled, all LEDs remain lit until a key is pressed with the exception of
the ENTER or DOWN key.
INTENS 7
1
2
3
4
5
6 This allows the user to select the degree of brightness between the values of 1-7 with 1 being
the dimmest and 7 being the brightest.
STRTUP On
Off When this feature is enabled, a display check is performed and the software version number
is shown at powerup.
RESET The reset parameter resets the Laser LT remote display to default parameters
3.5 Keypad
By using the keypad parameter, the user is able to configure keypad operation and allows strings to be sent with
each keypad press which can be modified to comply with other manufacturers.
EDIT
Display first 6
characters of format
ENABLE
Display and edit
active character and
ASCII value
Delete active
character
Scroll right in format string Scroll left in format string
Increment ASCII value of active character Decrement ASCII value of active character
Press to insert a space
before the active character Off
On
CONFIG SERIAL TEST KEYPAD DIGIO VERS
Figure 3-9. Keypad Menu
See Section 6.4 for how characters are displayed.