Rice Lake Remote Displays/Scoreboards - Laser LT - Manual (Page 23)

Table 3-4. Port 1, 2, 3 and 4 Serial Menu
Serial Menu
Port 1, 2, 3, and 4 Parameter Choices Description
Level 3 Submenus
Parameters
BAUD 9600
1200
2400
4800
19200
38400
57600
19200
57600
115200 Baud rate. Selects the transmission speeds for Ports 1, 2, 3,
and 4
BITS 8 NONE
7 ODD
7 EVEN Selects the bits of data of Ports 1, 2, 3, and 4
SBITS 1
2 Selects the number of stop bits of Ports 1, 2, 3, and 4
ECHO On
Off This enables or disables echoing of received EDP command
characters.
Table 3-3. Serial Communication Menu Summary
Serial Menu
Parameter Choices Description
Level 2 Submenus
Port 1, 2, 3, and 4 BAUD
DATA BITS
STOP BITS
ECHO Configure Ports 1, 2, 3, and 4. See Level 3 submenu parameter descriptions.
HOST PORT 2
PORT 1
PORT 3
PORT 4 Allows the user to select which port is connected to the weight indicator or
host device.
KEYDST PORT 2
OFF
PORT 1
PORT 3
PORT 4 Allows the user to select which port the key press data will be sent to.
DAISY OFF
PORT 1
PORT 2
PORT 3
PORT 4 This allows the user to select which port will echo data received from the host
device.
ADDRES 0 through 31 Assign a command address by selecting a number between 0-31. See
Section 3.9.1 for Run Mode Commands
Configuration 19