Rice Lake IQ plus 2100SL Digital Bench Scale - Manual (Page 17)

Configuration 19
3.2.5 Digital Input Menu
Figure 3-10. Digital Input Menu
3.2.6 Default Menu
The DEFLT menu is used to reset indicator configuration to the de ault values. There are no parameters
associated with the DEFLT menu. From the DEFLT menu, press
ENTER
(
ZERO
) to move down to the RESET
parameter. Press
ENTER
again to reset the indicator to the def ault configuration alues or press
RIGHT
(
UNITS
)
to cancel the indicator reset and return to the menu le vel above.
NOTE:
All load cell calibration settings are lost
when the RESET function is performed.
Figure 3-11. Default Menu
3.2.7 Version Menu
The VERS menu is used to check the softw are version installed in the indicator . There are no parameters
associated with the VERS menu: when selected, the indicator displays the installed software version number.
Figure 3-12. Version Menu
DIG IN Menu
Parameter Choices Description
Level 2 submenus
DIGIN1
DIGIN2 OFF
ZERO
UNITS
PRINT Specifies the function activated by digital inputs 1 and 2.
Table 3-6. Digital Input Menu Parameters
XXXXXXX XXXXXXX VERS DEFLT DIG IN SERIAL CALIBR CONFIG FORMAT
DIGIN1
OFF
DIGIN2
ZERO
UNITS
PRINT
OFF
ZERO
UNITS
PRINT
XXXXXXX XXXXXXX VERS DEFLT DIG IN SERIAL CALIBR CONFIG FORMAT
RESET
XXXXXXX XXXXXXX VERS DEFLT DIG IN SERIAL CALIBR CONFIG FORMAT
Software
version