Rice Lake IQ plus 2100SL Digital Bench Scale - Manual (Page 10)

12 IQ plus 2100 Installation Manual
Front Panel Menu Navigation
The front panel buttons are used to navigate through the
menus in setup mode (see Figure 3-2). The
UNITS
(
RIGHT
) button scrolls right (horizontally) on the same
menu level; the
ZERO
(
ENTER
) button moves down
(vertically) to dif ferent menu le vels and serv es as an
Enter key for selecting parameter v alues within the
menus.
Most of the configuration menus h ve three or four
levels. Figure 3-3 shows the general structure of the IQ
plus 210 configuration menus. Note the foll wing:
• On the first (main) menu l vel, press
RIGHT
to scroll
through the menus. Pressing
RIGHT
from the VERS
menu wraps around to the CONFIG menu. Press
ENTER
from any of the main menus to mo ve down
to the first parameter for that menu
• On the middle (parameter) menu le vels, press
RIGHT
to scroll through the parameter prompts
for the menu.
When the last parameter is
displayed, pressing RIGHT returns to the level
above
. Press
ENTER
from any parameter prompt
to move down to the v alues prompts for that
parameter.
• On the bottom (parameter v alue) menu le vel,
press
RIGHT
to scroll through the values for the
parameter. Pressing
RIGHT
from the last v alue
wraps around to first alue. Press
ENTER
to
select the v alue and return to the parameter
prompt.
Figure 3-4 on page 13 sho ws an e xample of the
navigation used to select a parameter v alue under the
SERIAL menu.
To edit numerical v alues, use the
RIGHT
button to
select the digit; use the
ENTER
button to increment or
decrement the value of the flashing digit (see Figure3-5
on page 13). Once all digits ha ve been edited, press
ENTER
to save the value and return to the parameter
prompt.
Figure 3-3. General Menu Structure
Parameter 1
Value 1
XXXXXXX XXXXXXX VERS DEFLT DIG IN SERIAL CALIBR CONFIG FORMAT
RIGHT
RIGHT RIGHT RIGHT
Menu Navigation
General Structure
RIGHT
RIGHT RIGHT RIGHT
ENTER
RIGHT RIGHT
RIGHT
Press ENTER at any parameter value to select the value and return to the parameter prompt
RIGHT
RIGHT RIGHT RIGHT
Parameter 2 Parameter 3 Parameter 4
Value 2 Value 3 Value 4
ENTER
Pressing RIGHT at the last parameter prompt returns to the menu prompt
(ENTER)
ZERO
(RIGHT)
UNITS