Rice Lake Tracer AV - Manual (Page 22)

18 Tracer AV Installation Manual
SERIAL Menu
Parameter Choices Description
Level 2 submenus
EDP BAUD
BITS
TERMIN
EOLDLY
ECHO Specifies settings for baud rate, data bits, termination characters, end-of-line delay, and echo
used by the EDP port.
Level 3 Submenus EDP Port and Printer Port
BAUD 9600
19200
38400
300
600
1200
2400
4800 Baud rate. Selects the transmission speed for the EDP or printer port.
BITS 8NONE
7EVEN
7ODD Selects number of data bits and parity of data transmitted from the EDP or printer port.
TERMIN CR/LF
CR Termination character. Selects termination character for data sent from the EDP or printer port.
EOLDLY 000
number End-of-line delay. Sets the delay period, in 0.1-second intervals, from when a formatted line is
terminated to the beginning of the next formatted serial output. Value specified must be in the
range 0-255, in tenths of a second (10 = 1 second).
NOTE: An EOL may be required for continuous transmission at slower baud rates to
ensure the receiving buffer is empty before another string is transmitted
ECHO ON
OFF This command enables or disables echoing of the serial commands sent to the indicator.
Table 3-7. Serial Menu Parameters