Rice Lake 920i FlexWeigh Systems - 103 - Manual (Page 19)

Entering Presets Softkey Menu 15
Preact Weight
Preact weight allows material to cut off prior to the original target value to allow for free fall material to settle onto
the scale.
1. Enter the preact weight using the arrow keys and the numeric keypad.
2. Press enter on the 920i to save that value.
Figure 4-5. Enter Preact Weight
High Level Weight
This is the weight which the system dispenses material and considers the scale to be full. The scale weight must be
above this value before the System 103 will start a batch.
1. Enter the high level weight using the arrow keys and the numeric keypad.
2. Press enter on the 920i to save that value.
Figure 4-6. High Level Weight
Low Level Weight
After completing the first Dispense following a system power-up, if the displayed gross weight is below Low Level
Weight, then the Refill output will automatically turn on until the gross weight exceeds High Level Weight.
Starting a new dispense cycle will be inhibited during the time Refill output is on.
1. Enter the low level weight using the arrow keys and the numeric keypad.
2. Press enter on the 920i to save that value.
Entering a Low Level Weight of zero (“0”) disables automatic refill upon Low Level.
- - - - -
Target Dribble Preact High Level
Consec. # Subtotal Total
100.0 Lb 75 0.0 500 Lb
2 0.0 Lb 0.0 Lb
Home
End
05/20/2011 10:27AM SCALE #1
SCALE
#1
Gross
Lb
Low Level
150 Lb
Cancel
Enter Preact Weight
=> 0.0
Enter Preact Weight
- - - - -
Target Dribble Preact High Level
Consec. # Subtotal Total
100.0 Lb 75 0.0 500 Lb
2 0.0 Lb 0.0 Lb
Home
End
05/20/2011 10:27AM SCALE #1
SCALE
#1
Gross
Lb
Low Level
150 Lb
Cancel
Enter High Level Weight
=> 500.0
Enter High Level Weight
Note