3 modifying the setup password, 4 enabling/disabling additional data fields – Rice Lake 920i FlexWeigh Systems - 103 User Manual
Page 13
Modifying the Setup Password
9
3.3
Modifying the Setup Password
Use the following steps to modify the setup password.
1. From the
Main Setup Menu Screen
, press the
Setup Password
softkey (Figure 3-2). The system prompts,
Enter New Password
.
Figure 3-5. Enter New Password
2. Enter the new password and press the
enter
key. The system prompts
Re-enter password
to verify.
3. Re-enter the password and press the
enter
key again. The system performs one of the following actions.
• If the passwords match, the system displays
Password Changed.
• If the passwords do not match, the system displays
Passwords Did Not Match
and exits the operation.
3.4
Enabling/Disabling Additional Data Fields
Use the following steps to enable or disable additional data fields.
1. From the
Main Setup Menu Screen
, press the
Setup Password
2. Press the
ID #1
or
ID #2
softkey. The system displays
Enable Extra Data #1
or
Extra Data #2
while displaying
Yes
or
No
softkeys.
Figure 3-6. Enabling ID’s
3. The operator does one of the following.
Press the
Yes
softkey, the system prompts
Enter ID#1 Name
. Enter the name using the alpha keypad (press
the
UP
arrow to access), and press the
enter
key on the 920i. A new data field appears on the main display
and as a softkey so that the operator can change it.
Press the
Yes
softkey and this returns the operator back to Step 1.
05/20/2011
02:15PM
SCALE #1
Cancel
End
Enter New Password
=>
_ _ _ _ _
SCALE #1
Gross
Lb
Home
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled)
Start
O
Refill Cmpt
ID #2 (disabled)
Resume O
Disp
Cmpt
Single-Speed (enabled)
Reset O
Slow
Cycle
Auto Print (disabled)
Stop
O
Disp Slow
Delay After Discharge (sec) 3.0
Refill
Disp
Fast
Setup Menu
05/20/2011
02:18PM
SCALE #1
No
Enable ID #1
_ _ _ _ _
SCALE #1
Gross
Lb
Yes
Program: Express 103 PN120598 (V 1.00)
ID #1 (disabled)
Start
O
Refill Cmpt
ID #2 (disabled)
Resume O
Disp
Cmpt
Single-Speed (enabled)
Reset O
Slow
Cycle
Auto Print (disabled)
Stop
O
Disp Slow
Delay After Discharge (sec) 3.0
Refill
Disp
Fast
Setup Menu