Kontron COMe-bCD2 - Manual (Page 78)

11 BIOS Setup
Kontron User's Guide ETXexpress® CD 78
11.11.1 ACPI Parameter Control
Feature Option Description
Enable ACPI
No
Yes
En/Disable ACPI BIOS (Advance
Configuration and Power Interface)
Enable ACPI _Sx state
None
S1
S3
S1+S3
This option allows to selectively enable Sx
standby states for ACPI OS. Choosing „Nono‟
will force the OS to have only S1, S4 and S5
states.
Route S3 signal to baseboard
Disabled
Enabled
If S3_SUS is not routed to the baseboard
then switching off main power is prevented.
This will achieve shorter recovery time but
higher power consumption. Please be sure
your board supports the appropriate S3
state when making this choice
M.A.R.S.
Disabled
Enabled
Enable/Disable support for the Kontron
M.A.R.S. Smart Battery system. if enabled,
the Smart Battery system will appear as an
ACPI device and allow an ACPI aware OS to
display and handle battery related
information.