Kontron COMe-bCD2 - Manual (Page 10)

2 Introduction
Kontron User's Guide ETXexpress® CD 10
The COMe-bCD2 uses the Pin-out Type 2 architecture, which includes PCI and IDE interfaces. These
modules either use onboard graphics capabilities or may use 16 PEG lanes to connect to an external
video controller. In case of onboard graphics, PEG pins may be alternatively used for two SDVO ports.
Pin-out Type 2 features include:
Dual 220 pin connectors (Primary Connector: Rows A-B and Secondary Connector:
Rows C-D, 440 pins total)
32-bit PCI interface
IDE port (to support legacy ATA devices)
Up to 5 PCI Express general purpose lanes
One, x16 PCI Express Graphics (PEG) slot
SDVO option (pins shared with PCI Express Graphics)
Maximum module input power capability extended to 188W
Up to 8 USB 2.0 ports; 4 shared over-current lines
Up to 4 Serial ATA or SAS ports
Dual 24-bit LVDS channels
Analog VGA and TV Out: Composite Video, S-Video, Component Video (YPbPr)
Intel High Definition Audio (Azalia) and AC '97 digital audio interface (external
CODEC)
Single Ethernet interface with integrated PHY
+12V primary power supply input, +5V standby and 3.3V RTC power supplies