Kontron COMe-bCD2 - Manual (Page 67)

11 BIOS Setup
Kontron User's Guide ETXexpress® CD 67
11.6 Integrated Video
Feature Option Description
Default Video Priority
IGD or PEG
PEG or IGD
both
Chossing 'IGD or PEG' will force the internal
graphics to be used as a boot display device
if it's enabled. With 'PEG or IGD' the
PCIexpress graphics will be used if present.
'Both' will initialize PEG AND IGD to allow
both being used in an OS. The option 'Both'
is not supported by Intel and may not work
in all configurations.
Default Primary Video Adapter
IGD
PEG
This entry allows to select the display device
used by the BIOS during POST and as the
basic graphics device for the OS. Only
devices that are ready to be used are listed
here. If 'Auto' is selected, the priority of the
primary display device is PEG>PCI>IGD
Integrated Graphics
Disabled
Auto
Enable or Disable the Internal Graphics
Device by setting item to the desired value
DVMT 3.0 Mode
Fixed
DVMT
Combo
Select the configuration of the DVMT 3.0
Graphics Memory that Driver will allocate for
use by the Internal Graphics Device.
1.Fixed
2. DVMT
3. Combo
Pre-Allocated Memory Size
1MB
8MB
Select the amount of Pre-Allocated Graphics
Memory for use by the Internal Graphics
Device
Total Graphics Memory
64MB
128MB
MaxDVMT
Select the amount of Total Graphics Memory
– Pre-Allocated + Fixed + DVMT for use by the
Internal Graphics Device
DVMT Graphics Memory Shows the current DVMT Graphics Memory