3 oem set serial configuration, 4 oem set control state – Kontron AM4220 User Manual
Page 57
42
www.kontron.com
5.1.3.3
OEM Set Serial Configuration
Example: Using onboard
ipmitool –l 3 raw 0x30 0x06 0xab 0xca 0xca 0xce 0xc9
5.1.3.4
OEM Set Control State
• The MMC shall support the following Control Ids
• The MMC shall save and restore these settings.
• The MMC shall immediately restart the payload of the module on change of the “interface settings”.
Command Name
LUN
NetFn
Command Number
OemApSetSerialconfig
3
0x30
0x06
Byte Num
Data Field / Byte Raw
Request Data
1...5
0xAB 0xCA 0xCA 0xCE 0xC9
6
MUX setting
Response Data
1
Completion Code
Command Name
LUN
NetFn
Command Number
CmdSetControlState
0
0x3E
0x20h
See also other documents in the category Kontron Hardware:
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)